|
|
 |
| DELLARTE BIGTONE PICKUP/BRIDGE COMBO |
| Part Specification: Long time used in Europe by players like Stochelo Rosenberg, Jimmy Rosenberg, Angelo Debarre, Boulou and Elios Ferre, Bireli Lagrene, etc., this system is designed for accurate sound, high output, feedback resistance and reliability at a reasonable cost. The endpin jack is supplied as well as installation instructions. The shielded cable is audiophile quality, with no perceptible noise or distortion. No battery required.
Some Combos Selmer type bridge with cheap piezo pickups are imported from Europe and sold as Bigtone pickups.
Dell Arte Instruments and Gypsy Jazz Distribution are the sole, exclusive importers and distributors of the Bigtone pickups in the U.S since 1999.
At no extra charge we will make a custom Bigtone combo. (This will save you time and money during the installation of the pickup on your guitar)
All we need are the dimensions of the bridge presently on the guitar: the height at the bass and treble side (from the top of the guitar to where the string touches the bridge), the width and the lenght (they varie from brand to brand) You can do all this by emailing us at info@gypsyjazz.net after you placed your order.
|
| Price : $245.00 |
 |
|
| |
|
 |
| DR TUNERS |
| Part Specification: Made to the same specifications as the original Selmer tuners. Solid brass plate and covers. Gorgeous Ivoroid buttons. Gives your guitars that "vintage" look! Comes with 12 bushings and the mounting screws |
| Price : $295.00 |
|
|
| |
|
 |
| END PIN JACK |
| Part Specification: Nickel plated end pin jack. Designed to be tightened from outside the guitar, ideal for the petite bouche Selmer type guitar.
|
| Price : $10.95 |
|
|
| |
|
 |
| END PIN JACK |
| Part Specification: Gold plated end pin jack. Designed to be tightened from outside the guitar, ideal for petite bouche Selmer type guitar.
|
| Price : $12.95 |
|
|
| |
|
 |
| GOTOH TUNING MACHINES |
| Part Specification: Tuning machines, 3- on- a- plate open gears on an engraved brass plate. Satin gold finish, Ivoroid buttons. Provided with flat head Philip screws. 1/4 inch shaft, 35mm hole spacing.
Like on all other modern tuners replacements for Selmer type guitars the posts on the D and G strings are slightly too long and need to be ground.
If you want us to do this for you (at no charge) please send me an email after ordering them on the site. PLease let us know if you are planning to use these tuners on a Saga Gitane guitar. Saga has changed the specs drastically on the headstock and we need to file all six posts.
|
| Price : $85.00 |
|
|
| |
|
 |
| HIGH QUALITY HAND BUILT SELMER GUITAR BRIDGE, low height, 11/16 |
| Part Specification: Modern reproduction of a 1930s Selmer guitar bridge, made of fine polished ebony. The straight unnotched top edge is angled for overall string compensation. This bridge is 5-1/16 inches long, 9/16 inches wide, and 11/16 inches tall. Also available made to your custom size,. Same price. |
| Price : $34.00 |
|
|
| |
|
|
|
| HIGH QUALITY HAND BUILT SELMER GUITAR BRIDGE, medium height, 13/16 |
| Part Specification: Modern reproduction of a 1930s Selmer guitar bridge, made of fine polished ebony. The straight unnotched top edge is angled for overall string compensation. This bridge is 5-1/16 inches long, 9/16 inches wide, and 13/16 inches tall. Also available made to your custom size, same price. |
| Price : $34.00 |
|
|
| |
|
|
|
| HIGH QUALITY HAND MADE SELMER GUITAR BRIDGE, tall height, 15/16 |
| Part Specification: Modern reproduction of a 1930s Selmer guitar bridge, made of fine polished ebony. The straight unnotched top edge is angled for overall string compensation. This bridge is 5-1/16 inches long, 9/16 inche wide, 15/16 inches tall. Also available made to your custom size, same price. |
| Price : $34.00 |
|
|
| |
|
 |
| MILLER TUNERS #202 |
| Part Specification: These tuners have been specially developed by Rainer Miller for Selmer type guitars. They combine the design of the original Selmer tuners with todays technique. As far as quality goes these Selmer reproduction tuners are the best, bar none!!! The enclosed gears are held by a casing on the baseplate. The gear ratio is 1:14. Nickel plated shaft. The strings post spacing is a standard 35mm, the post diameter is 6mm. Baseplate and casing are made of brass. Bone buttons
|
| Price : $260.00 |
|
|
| |
|
 |
| MILLER TUNERS #207 |
| Part Specification: These tuners have been specially developed by Rainer Miller for Selmer type guitars. They combine the design of the original Selmer tuners with todays technique. As far as quality goes these Selmer reproduction tuners are the best, bar none!!! The enclosed gears are held by a casing on the baseplate. The gear ratio is 1:14. Nickel plated shaft. The strings post spacing is a standard 35mm, the post diameter is 6mm. Baseplate and casing are made of brass. Imitation Tortoise shell buttons |
| Price : $260.00 |
|
|
| |
| | |
|
Previous 1 2 3
Next |
|
|
